Listers:
I have hunted for the correct square nut that is mounted on the front header
of the hardtop (inside welded cage) to install the two front mounting bolts
with no luck. I even contacted a local fastener wholesaler who could get
them but I would need to order 3200. That would probable be a supply for
every hardtop still out there! I found a replacement 5/16 course thread
square nut from Ace hardware, but I don't want to use a non-stock bolt
(rounded top) for the install. I have the 5/16 fine thread 6 sided nut.
Does anyone know a way to weld that to a square size frame??? Or, has
anyone made a square from steel stock of the correct dimensions and
thickness and drilled and tapped the right thread. I really do not want to
install the course square nut and have two different mounting bolts. Also
check with TRF and they do not have a supplier, but would be interested in
one if anyone knows one.
Thanks in advance!
Hardtopless in Orlando
Jim Henningsen
75 TR6 CF35914U
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|