Thanks to all who responded. I'll check the radiator shops tomorrow
and see how much they run.
While I was visiting there, I thought I'd have my radiator recored.
Anyone have a ballpark figure for this?
Dave Friedlander
'74 TR6 ready for paint!
TR250Driver@aol.com wrote:
> Dave,
> I have done my TR3 tank with a gas tank sealing kit from Eastwood similar to
> the slushing compounds previously mentioned. It was OK with no know problems
> for over 10 years now. However when it came to my TR250 & TR6 I chose to go
> to Parma Radiator in Cleveland, OH who is a dealer for Gas Tank Renu-USA,
> Detroit, MI (313-837-6122). This process seals the tank inside and out and
> is very impressive making the tank bullet proof for a lifetime. It even
> comes with a warranty. I would definitely recommend this if you want a primo
> tank job. I would think that they have a dealer in your area. Not cheap,
> $180 to $200 if my memory is correct.
>
> Oh by the way I am currently trying to strip some latex stuff out of the tank
> of my Honda 305 Scrambler motorcycle that is peeling and flaking off. I am
> going to have to peak inside the TR. to see if all is well in there.
>
> Cheers,
> Darrell
|