6pack
[Top] [All Lists]

Dash removal

To: 6pack@autox.team.net
Subject: Dash removal
From: "Vink, Graham" <vinkg@fleishman.com>
Date: Tue, 18 Feb 2003 14:29:17 -0600
another tip: DISCONNECT THE BATTERY. There are some live live wires back
there, especially to the ammeter.

Graham


-----Original Message-----
From: Todd Bermudez [mailto:red_tr250@hotmail.com]
Sent: Tuesday, February 18, 2003 3:10 PM
To: flmont@mindspring.com; 6pack@autox.team.net
Subject: Re: Fw: used seats for a 73'/Dash removal


No on the seats

As far as the dash...remove the screws(obvious).  You'll need to unscrew the

tach & speedo cables.  Remove the round nuts that secure the speedo & tach.

Remove the wiper switch as well(I think).  Unscrew the hazard knob.  You 
should be able to rock the dash fwd at this point.  Be careful of the 
glovebox door at this point.

If you're not familiar with wiring diagrams, you should probably mark or 
tape everything at this point.

Have fun,

Todd
TR250 CD3705L
TR6 CF25768UO








>From: "Frank Montalbano" <flmont@mindspring.com>
>Reply-To: "Frank Montalbano" <flmont@mindspring.com>
>To: <6pack@autox.team.net>
>Subject: Fw:  used seats for a 73'/Dash removal Date: Tue, 18 Feb 2003 
>12:35:02 -0700
>
>----- Original Message -----
>From: Frank Montalbano <flmont@mindspring.com>
>To: <6pack@auto.team.net>
>Sent: Monday, February 17, 2003 10:51 AM
>Subject: used seats for a 73'/Dash removal
>
>
> > Would anyone know where to get some used seats for my 73,Just a drivers
>seat
> > ...And how do ya remove the wooden dash board,....Thanks  Frank


_________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
  • Dash removal, Vink, Graham <=