Engine Stumbles

["John Phillips" <TR6@vigoris.net>]

Jim

Sometimes when you add the high voltage coil it contains a ballast resistor.
Add that to the ballast resistor in the wiring harness and it can cause some
problems.  Try running a wire from the White Wire terminal at the fuse block
to the coil in lieu of the wire from the harness.  That will bypass one of
the ballast resistors.


John Phillips, Claremore, OK
Green Country Triumphs & Jaguar Enthusiasts Club
76 TR6 CF51655   89 XJS Convertible
 http://www.greencountrytriumphs.com/