A comparison of notes...
'Flossie's' door cappings are begining to look a little tired. No
detaching of veneer from the backing but a partial de-laminating of
the original varnish from the veneer and extensive longitudinal
cracking. I'm currently thinking along the lines of paint stripper,
followed by careful sanding with 700 grit (and higher) followed by a
few coats of polyurethane varnish with flatting between each coat.
Any BTDT's around wit better, quicker and visually appealing
alternative suggestions? Thanks
Jonmac
1950 Ferguson TED20 152318
1970 Triumph 2.5PI MG4305DL(O)
1974 Triumph 2000 ML2294DLO
///
/// 2000-register@autox.team.net mailing list
///
|