- 1. [TR] TR2/3 dash control knobs. (score: 1)
- Author: Angelo Graham <agraham@execulink.com>
- Date: Tue, 14 Jun 2011 17:37:17 -0400
- Chris, The only way I know is to remove the assembly, grease the cable and reassemble. Bob triumphs@autox.team.net Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums
- /html/triumphs/2011-06/msg00258.html (7,136 bytes)
- 2. Re: [TR] TR2/3 dash control knobs. (score: 1)
- Author: "Joe Laurito" <trglory@verizon.net>
- Date: Tue, 14 Jun 2011 18:25:50 -0400
- I THINK I have it solved- although I'll have to wait for another day in the 90s to be sure. Again - thanks to all who contributed. And to answer Randall's questions, the shield is between carbs and e
- /html/triumphs/2011-06/msg00259.html (8,193 bytes)
- 3. Re: [TR] TR2/3 dash control knobs. (score: 1)
- Author: "Randall" <tr3driver@ca.rr.com>
- Date: Tue, 14 Jun 2011 15:51:28 -0700
- my understanding is that its the record book. racing accomplishments. Frank ________________________________ From: William Brewer <wsb1960tr3a@att.net> To: Triumphs <triumphs@autox.team.net> Sent: W
- /html/triumphs/2011-06/msg00260.html (7,233 bytes)
- 4. Re: [TR] TR2/3 dash control knobs. (score: 1)
- Author: Loumetelko@aol.com
- Date: Tue, 14 Jun 2011 20:57:15 -0400 (EDT)
- was always meaning to ask the same question of a similar car. red TR3 heading south from Bonneville at last years speed week. Lister? Frank ________________________________ From: William Brewer <wsb1
- /html/triumphs/2011-06/msg00262.html (6,806 bytes)
- 5. Re: [TR] TR2/3 dash control knobs. (score: 1)
- Author: "Carl TR" <cfmtr3a@verizon.net>
- Date: Wed, 15 Jun 2011 01:24:47 -0400
- it was a design from sales and marketing. they never tell the truth!! ;-) But.....what racing accomplishments did Standard Triumph have when the emblem first appeared on the Standard 8 in 1945? Cheer
- /html/triumphs/2011-06/msg00265.html (7,879 bytes)
- 6. Re: [TR] TR2/3 dash control knobs. (score: 1)
- Author: Chris Simo <ccsimonsen@gmail.com>
- Date: Mon, 20 Jun 2011 21:40:16 -0400
- Please let me know as I have questions about it triumphs@autox.team.net Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums
- /html/triumphs/2011-06/msg00353.html (7,243 bytes)
- 7. [TR] TR2/3 dash control knobs. (score: 1)
- Author: agraham at execulink.com (Angelo Graham)
- Date: Tue, 14 Jun 2011 17:37:17 -0400
- Hello List: Before I destroy something else, asking about the dash control knobs on the various switches. How do they come off? Screw/threaded on shafts? Friction fit?: Can't see any grub screws, so
- /html/triumphs/2011-06/msg00785.html (8,061 bytes)
- 8. [TR] TR2/3 dash control knobs. (score: 1)
- Author: trglory at verizon.net (Joe Laurito)
- Date: Tue, 14 Jun 2011 18:25:50 -0400
- Look carefully at the underside of the knob to see a metal peg in the plastic knob. Take a small drift and push that peg in. Give the knob a little pull and it will come right off the shaft. Joe Laur
- /html/triumphs/2011-06/msg00786.html (9,231 bytes)
- 9. [TR] TR2/3 dash control knobs. (score: 1)
- Author: tr3driver at ca.rr.com (Randall)
- Date: Tue, 14 Jun 2011 15:51:28 -0700
- Except for the heater knob and screen washer (if you have one), they should all have a small hole on the bottom side. You push a pin punch or similar into the hole to depress the pin against a spring
- /html/triumphs/2011-06/msg00787.html (8,192 bytes)
- 10. [TR] TR2/3 dash control knobs. (score: 1)
- Author: Loumetelko at aol.com (Loumetelko at aol.com)
- Date: Tue, 14 Jun 2011 20:57:15 -0400 (EDT)
- Except for the heater knob and screen washer (if you have one), they should all have a small hole on the bottom side. You push a pin punch or similar into the hole to depress the pin against a spring
- /html/triumphs/2011-06/msg00789.html (8,218 bytes)
- 11. [TR] TR2/3 dash control knobs. (score: 1)
- Author: cfmtr3a at verizon.net (Carl TR)
- Date: Wed, 15 Jun 2011 01:24:47 -0400
- NFI- see http://cgi.ebay.com/ebaymotors/MGA-MGB-1967-Plain-Dash-Knob-Map-Light-Switch -/200400622403?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2ea8ced343 You can see the shape of the hole, the
- /html/triumphs/2011-06/msg00792.html (8,741 bytes)
- 12. [TR] TR2/3 dash control knobs. (score: 1)
- Author: ccsimonsen at gmail.com (Chris Simo)
- Date: Mon, 20 Jun 2011 21:40:16 -0400
- Ditto the grub screw on the heater knob. Also - becareful with the other knobs - the bakelite by now is quite brittle.I used an automatic center punch after trying an awl..... It went in and I was ab
- /html/triumphs/2011-06/msg00885.html (8,518 bytes)
This search system is powered by
Namazu