Subject: | [TR] TR2/3 dash control knobs. |
---|---|
From: | ccsimonsen at gmail.com (Chris Simo) |
Date: | Mon, 20 Jun 2011 21:40:16 -0400 |
References: | <4DF7D48D.6080500@execulink.com> <!&!AAAAAAAAAAAYAAAAAAAAAAAokWe7nBZPoA+vt51ClezCgAAAEAAAAOL6l365kIpAkFFWi/yTFrEBAAAAAA==@verizon.net> |
Ditto the grub screw on the heater knob. Also - becareful with the other knobs - the bakelite by now is quite brittle.I used an automatic center punch after trying an awl..... It went in and I was able to remove the knob - but it cracked my choke knob - really unhappy about it. It's an early one that does not have the pull below the Choke. Chris |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TR] TR2/3 dash control knobs., Chris Simo |
---|---|
Next by Date: | Re: [TR] TR6 body gap at driver's door, Chad |
Previous by Thread: | Re: [TR] TR2/3 dash control knobs., Chris Simo |
Next by Thread: | [TR] HS6 Linkage Bracket, John & Pat Donnelly |
Indexes: | [Date] [Thread] [Top] [All Lists] |