- 1. exhaust gaskets and ar leaks (score: 1)
- Author: Marko Lahtinen <lahtinen_marko@yahoo.com.au>
- Date: Mon, 5 Aug 2002 11:57:49 +1000 (EST)
- I'm having difficulty getting my extractors to fit properly and not leak. It was suggested that I replace my single gasket with a thicker one made of two gaskets that have coppercoat in between them
- /html/datsun-roadsters/2002-08/msg00247.html (7,677 bytes)
- 2. Re: exhaust gaskets and ar leaks (score: 1)
- Author: Stan Chernoff <az589@lafn.org>
- Date: Sun, 04 Aug 2002 19:08:18 -0700
- Check the surface of the header (Extractor) flange with a straightedge. If it is warped excessively you will get a leak. Some headers have a weld bead around the seal side of the tubes and may cause
- /html/datsun-roadsters/2002-08/msg00248.html (8,643 bytes)
- 3. Re: exhaust gaskets and ar leaks (score: 1)
- Author: "Patrick J. Horne" <horne@cs.utexas.edu>
- Date: Sun, 4 Aug 2002 22:08:03 -0500 (CDT)
- You may have a problem with the amount of pressure that the manifold nuts put on the header. Compare the thickness of the header and intake manifold at the locations where a single washer holds both
- /html/datsun-roadsters/2002-08/msg00252.html (8,978 bytes)
- 4. Re: exhaust gaskets and ar leaks (score: 1)
- Author: Geegc@aol.com
- Date: Mon, 5 Aug 2002 00:14:18 EDT
- Return-path: <Geegc@aol.com> From: Geegc@aol.com Full-name: Geegc Message-ID: <5a.f6b7cec.2a7f5573@aol.com> Date: Mon, 5 Aug 2002 00:13:39 EDT Subject: Re: exhaust gaskets and ar leaks To: az589@lafn
- /html/datsun-roadsters/2002-08/msg00256.html (8,100 bytes)
- 5. Re: exhaust gaskets and ar leaks (score: 1)
- Author: John Atchison <jda@srv.net>
- Date: Mon, 05 Aug 2002 08:01:39 -0600
- Many headers (even new) do not have a good, flat, mounting flange surface. Best idea is to take your header to a machine shop, have them check the mounting flange surface and surface it if necessary
- /html/datsun-roadsters/2002-08/msg00269.html (8,682 bytes)
- 6. Re: exhaust gaskets and ar leaks (score: 1)
- Author: SRAPL311@aol.com
- Date: Mon, 5 Aug 2002 12:01:14 EDT
- Provided they are in alignment about all axis. Larry /// datsun-roadsters@autox.team.net mailing list
- /html/datsun-roadsters/2002-08/msg00271.html (6,947 bytes)
This search system is powered by
Namazu