- 1. changing wheel lugs (score: 1)
- Author: gary <gary2@sprintmail.com>
- Date: Thu, 08 Jul 1999 13:27:01 -0700
- I'm planning on installing some '85 300Z wheels on my '67. Two questions. Do I have to switch to 12mm lugs? If I do, will I have to enlarge the holes in the drums, axles and rotors to accommodate the
- /html/datsun-roadsters/1999-07/msg00170.html (6,843 bytes)
- 2. Re: changing wheel lugs (score: 1)
- Author: DemonTSi@aol.com
- Date: Thu, 8 Jul 1999 17:00:33 EDT
- << I'm planning on installing some '85 300Z wheels on my '67. Two questions. Do I have to switch to 12mm lugs? If I do, will I have to enlarge the holes in the drums, axles and rotors to accommodate
- /html/datsun-roadsters/1999-07/msg00172.html (7,273 bytes)
- 3. Re: changing wheel lugs (score: 1)
- Author: "Patrick J. Horne" <horne@cs.utexas.edu>
- Date: Thu, 8 Jul 1999 20:10:33 -0500
- I picked up a set of lug bolts for early Corvairs. There were two types, you want the ones with the smaller heads. These studs are the same 7/16 thread, but are 1/2" longer. I haven't installed them
- /html/datsun-roadsters/1999-07/msg00179.html (7,224 bytes)
- 4. Re: changing wheel lugs (score: 1)
- Author: "NATHAN J RUFFCORN" <NRUFFCORN@prodigy.net>
- Date: Thu, 8 Jul 1999 22:29:43 -0500
- thread, doing I took the advice of someone else on the list and did the same several weeks ago. Very happy as they were a very INEXPENSIVE solution. The only difference was the burl. The original ro
- /html/datsun-roadsters/1999-07/msg00184.html (7,972 bytes)
- 5. RE: changing wheel lugs (score: 1)
- Author: "Miller, Don" <MillerD2@idhw.state.id.us>
- Date: Mon, 12 Jul 1999 07:30:12 -0600
- I just did this to my car. 1985 300ZX4 bolt 15x6.5 wheels. Because the lugnuts are special for the wheels, I did change. You will need to get a 31/64 drill bit to enlarge the holes just a little. I u
- /html/datsun-roadsters/1999-07/msg00239.html (7,640 bytes)
This search system is powered by
Namazu