Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Primed\s+oil\s+system\s+but\s+should\s+this\s+happen\?\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Primed\s+oil\s+system\s+but\s+should\s+this\s+happen\?\s*$/: 5 ]

Total 5 documents matching your query.

1. Primed oil system but should this happen? (score: 1): Author: dave.williams@chaos.lrk.ar.us (Dave Williams); Date: Sun, 01 Jul 2001 06:42:00 -0500; Yeah, the "flaming drill of Death" syndrome. 1/4" and light-duty 3/8" drills really aren't designed for full load for more than a few seconds. You can prime in short bursts until the drill gets hot;; /html/buick-rover-v8/2001-07/msg00000.html (7,303 bytes)
2. Re: Primed oil system but should this happen? (score: 1): Author: jon <jonaxt@pacifier.com>; Date: Sun, 01 Jul 2001 13:53:05 -0700; Gee, I'd at least pop off the pump cover and recheck the axial and radial clearances, expecially if you put in one of those pump elongators. Is it notchy if you turn it by hand? My experience is that; /html/buick-rover-v8/2001-07/msg00001.html (7,715 bytes)
3. Re: Primed oil system but should this happen? (score: 1): Author: "Pete Bronlund" <peteb@clear.net.nz>; Date: Wed, 4 Jul 2001 09:17:16 +1200; Thanks, folks for the truly helpful info! This is what i love about the www. Anyway, i (sensibly) put a mechanical type pressure guage in the system (fun finding adaptor couplings!!) & after about 30; /html/buick-rover-v8/2001-07/msg00002.html (7,965 bytes)
4. Primed oil system but should this happen? (score: 1): Author: "Pete Bronlund" <peteb@clear.net.nz>; Date: Sun, 1 Jul 2001 14:06:53 +1200; Hi folks. I've primed my rebuilt engine by running the oilpump with a mains drill prior to 1st startup. There's plenty of oil being pumped (to the rockers etc) but i'm really worried about the amount; /html/buick-rover-v8/2001-06/msg00016.html (7,138 bytes)
5. Re: Primed oil system but should this happen? (score: 1): Author: "bown" <bown@concentric.net>; Date: Sat, 30 Jun 2001 20:36:02 -0600; What kind of electric drill are you using? Is it a 1/4", 3/8", or a 1/2". How many RPM's does the drill turn? I have used a 1/2" 600 RPM drill motor and it did not appear to be loaded much. I think; /html/buick-rover-v8/2001-06/msg00017.html (7,483 bytes)

Current List: 1 - 5
Page: [1]