- 1. LUCAS Voltage Regulators... (score: 1)
- Author: DELUCAJ <DELUCAJ@mops.wl.com>
- Date: Wed, 28 May 1997 21:19:52 -0500
- I'm looking for a source for a reasonably priced voltage regulator before I call Morgan Spares. The '62 4/4 is currently sporting a LUCAS RB340 square boxy type (with the letters E-D-WL-F-B stamped i
- /html/morgans/1997-05/msg00074.html (7,631 bytes)
- 2. Re: LUCAS Voltage Regulators... (score: 1)
- Author: "John T. Blair" <jblair@exis.net>
- Date: Wed, 28 May 1997 22:59:33 -0400
- I call Morgan Spares. letters E-D-WL-F-B stamped in the plastic cover). Joe You sure made me do my homework. I found a listing for the RB340 reg. I'm supprised that your 62 used that. I'd be interset
- /html/morgans/1997-05/msg00075.html (8,980 bytes)
- 3. Re: LUCAS Voltage Regulators... (score: 1)
- Author: ebrown@ms.com
- Date: Thu, 29 May 1997 08:07:21 -0400
- Is your ammeter showing a charge at idle but less at higher speeds? I found that I had a short in my generator where the armature was slightly damaged and basically shorted out at higher RPMs as cent
- /html/morgans/1997-05/msg00078.html (8,510 bytes)
- 4. Re: LUCAS Voltage Regulators... (score: 1)
- Author: Joseph DeLuca <DELUCAJ@mops.wl.com>
- Date: Thu, 29 May 1997 08:23:28 -0500
- That's a good point Chip, and one I never considered. Until the temporary VR gets replaced with a brand new unit, however, I won't be able to check it out properly. With my old VR the battery actual
- /html/morgans/1997-05/msg00079.html (8,161 bytes)
- 5. Re: LUCAS Voltage Regulators... (score: 1)
- Author: Joseph DeLuca <DELUCAJ@mops.wl.com>
- Date: Thu, 29 May 1997 07:44:07 -0500
- Thanks John, You did quite a bit of research for me. It should help me home in on the right unit. I'll check with TRF. My VR has the push-on connectors, and I suspect that this is not the original un
- /html/morgans/1997-05/msg00083.html (7,341 bytes)
This search system is powered by
Namazu