- 1. caliper rebuild (score: 1)
- Author: "Todd Greenwalt" <toddg@amc.com>
- Date: Wed, 21 Aug 2002 09:55:18 -0700
- I need to rebuild the brake caliper piston. The rubber piston ring is worn and leaks. How do I remove the ring? I can't figure out how the piston comes apart. I have the piston out of the caliper. Th
- /html/datsun-roadsters/2002-08/msg01038.html (6,480 bytes)
- 2. Caliper rebuild (score: 1)
- Author: "Brian St. Jacques" <brian@varatouch.com>
- Date: Fri, 08 Sep 2000 13:52:08 -0700
- Hello All, I just popped the pistons from all four brake caliper assemblies to see if they are worth saving, trouble is, I'm not sure how to judge weather they are usable. There is surface rust on al
- /html/datsun-roadsters/2000-09/msg00260.html (7,157 bytes)
- 3. Re: Caliper rebuild (score: 1)
- Author: Fred_Katz@ci.sf.ca.us
- Date: Fri, 8 Sep 2000 14:35:14 -0700
- IMHO, it's better to bite the bullet and replace them. If there is some slight pitting, you can clean them up and lube them with caliper lubricant (it comes with the rebuild kit). They'll work for a
- /html/datsun-roadsters/2000-09/msg00261.html (8,316 bytes)
- 4. Re: Caliper rebuild (score: 1)
- Author: Ronnie Day <ronday@home.com>
- Date: Fri, 8 Sep 2000 21:04:07 -0500
- It's not clear (at least to me<G>) if you're saying the calipers are pitted, or if it's the pistons that are pitted. If it's the exterior of the calipers rather than the piston bore or the pistons t
- /html/datsun-roadsters/2000-09/msg00273.html (9,152 bytes)
- 5. caliper rebuild (score: 1)
- Author: "Sochoux, Stephan" <SSochoux@dbc.com>
- Date: Tue, 27 Apr 1999 11:12:06 -0700
- Hello all, I sent this out last night but it looks like it didn't make it to the list... My brakes are pretty bad (even after a complete flush) so i decided to inspect them more closely. I started wi
- /html/datsun-roadsters/1999-04/msg00749.html (7,693 bytes)
- 6. Re: caliper rebuild (score: 1)
- Author: Kevin McDonald <kevin.mcdonald@dev.tivoli.com>
- Date: Tue, 27 Apr 1999 14:19:39 -0500
- I bought new seals and a brake hone and worked mine over pretty well. As the stones on the hone started going away I realized it was hopeless since there were still pits showing and bought 4 new cali
- /html/datsun-roadsters/1999-04/msg00751.html (7,313 bytes)
- 7. Re: caliper rebuild (score: 1)
- Author: bill/liz wessel <bwessel@itis.com>
- Date: Tue, 27 Apr 1999 20:03:49 -0500
- For minor corrosion such as you describe, I would take some Scotch Brite (3M) green and wet it with brake fluid (used is ok) and polish the corrosion out. You could also use "crocus cloth" wetted wi
- /html/datsun-roadsters/1999-04/msg00761.html (6,863 bytes)
- 8. Re: caliper rebuild (score: 1)
- Author: BERKEN@aol.com
- Date: Wed, 28 Apr 1999 09:32:31 EDT
- << Hello all, I sent this out last night but it looks like it didn't make it to the list... My brakes are pretty bad (even after a complete flush) so i decided to inspect them more closely. I started
- /html/datsun-roadsters/1999-04/msg00772.html (8,970 bytes)
This search system is powered by
Namazu