- 1. 4 to 5 Lug (score: 1)
- Author: dhbain <dhbain@uswest.net>
- Date: Wed, 28 Jun 2000 13:04:52 -0700
- Hi Gang! With the low selection of four lug wheels out there I wanted to know how to go to 5 lugs. Things like what part do I have to change and what type of donor car does it come from? This would b
- /html/datsun-roadsters/2000-06/msg01085.html (7,014 bytes)
- 2. Re: 4 to 5 Lug (score: 1)
- Author: DemonTSi@aol.com
- Date: Wed, 28 Jun 2000 17:31:34 EDT
- There's actually A LOT of 4 lug wheels out there... mostly thanks to the popularity of the hondas. Most popular modern wheels have a FWD offset, which means that their backspacing is about .5"-.75" t
- /html/datsun-roadsters/2000-06/msg01094.html (7,640 bytes)
- 3. Re: 4 to 5 Lug (score: 1)
- Author: "datsunmike" <datsunmike@nyc.rr.com>
- Date: Wed, 28 Jun 2000 19:42:29 -0400
- Not so fast - Hondas are 4x100 and very few cars are 4x4.5". Sorry to put ink on the ointment. '66 Mike from NYC which cuz cost (I'd
- /html/datsun-roadsters/2000-06/msg01117.html (8,283 bytes)
- 4. Re: 4 to 5 Lug (score: 1)
- Author: DemonTSi@aol.com
- Date: Wed, 28 Jun 2000 22:28:04 EDT
- Aha...but later accords and preludes are 4x4.5" (4x114.3mm)! Oh yah, and like 90% of most new aftermarket wheels are drilled for both bolt patterns nowadays... Van
- /html/datsun-roadsters/2000-06/msg01134.html (7,222 bytes)
- 5. Re: 4 to 5 Lug (score: 1)
- Author: Mike Poorboy <bitterrootprop@nidlink.com>
- Date: Wed, 28 Jun 2000 19:34:13 -0700
- Van is right about plenty of wheels being available for the Roadster. TSW makes at least 6 different models and I have found over 10 other manufacturers of aftermarket wheels that fit the Roadster f
- /html/datsun-roadsters/2000-06/msg01135.html (9,549 bytes)
- 6. Re: 4 to 5 Lug (score: 1)
- Author: "datsunmike" <datsunmike@nyc.rr.com>
- Date: Thu, 29 Jun 2000 07:05:42 -0400
- I apologize for my ignorance. All the Hondas/Acuras I owned were 4x100and from what I read most of the wheels for sale are the same bolt pattern. And I forgot about those wheels that fit everything -
- /html/datsun-roadsters/2000-06/msg01141.html (7,927 bytes)
- 7. Re: 4 to 5 Lug (score: 1)
- Author: CalSpeed@aol.com
- Date: Thu, 29 Jun 2000 15:22:52 EDT
- << Aha...but later accords and preludes are 4x4.5" (4x114.3mm)! Oh yah, and like 90% of most new aftermarket wheels are drilled for both bolt patterns nowadays... >> Yes.... but you will need to put
- /html/datsun-roadsters/2000-06/msg01177.html (7,345 bytes)
- 8. Re: 4 to 5 Lug (score: 1)
- Author: "datsunmike" <datsunmike@nyc.rr.com>
- Date: Thu, 29 Jun 2000 20:15:39 -0400
- I don't think you have to worry about the bearings in this case as the spacers will be used to bring the wheels to the correct offset, BUT I would be concerned about the studs. Mike -- Original Mess
- /html/datsun-roadsters/2000-06/msg01201.html (8,069 bytes)
This search system is powered by
Namazu