Mail Archive Search: <+from:MKlepp4335@cs.com>

Results:

References: [ +from:MKlepp4335@cs.com: 303 ]

Total 303 documents matching your query.

41. Re: [oletrucks] To boost or not to boost? (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 14 Jan 2002 19:07:42 EST; << An upgrade for this spring will be the bendix design from a donor '52 (both axles) and I expect further improvement (wider pad dimensions and improved contact during braking). >> I upgraded my '48; /html/oletrucks/2002-01/msg00269.html (7,415 bytes)
42. Re: [oletrucks] overheating problem (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 17 Jan 2002 17:39:29 EST; << I revved the engine, but did not see the dist. rotate at all (vacuum advance). Should it not rotate such that I would see this externally (or does all the movement occur internally without the out; /html/oletrucks/2002-01/msg00316.html (7,516 bytes)
43. Re: [oletrucks] Bed Mounting on an AD (score: 1): Author: MKlepp4335@cs.com; Date: Fri, 18 Jan 2002 21:20:13 EST; << The question is do both the front and rear mounts use the 2" rubber mounts or just the front. It doesn't look right with the blocks on the rear and my common sense tells me they only go on the fro; /html/oletrucks/2002-01/msg00344.html (7,016 bytes)
44. [oletrucks] Valve cover gasket (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 22 Jan 2002 12:30:49 EST; In the past (20 years ago?) I bought a rubber valve cover gasket for a 235. It was great, could be reused when it was valve adjustment time. I have tried to locate one recently without any luck. Does; /html/oletrucks/2002-01/msg00414.html (6,735 bytes)
45. Re: [oletrucks] Spare tire carrier for AD (score: 1): Author: MKlepp4335@cs.com; Date: Fri, 25 Jan 2002 17:48:58 EST; << I have one, took it off a truck that was in the junkyard on its side. I started to sand blast it - but it was slow going. I also have the hard to find support bolt with the ORIGINAL wing nut. >> T; /html/oletrucks/2002-01/msg00504.html (7,779 bytes)
46. Re: [oletrucks] On the search (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 18 Dec 2001 12:35:51 EST; << It is 57 1/2" backing plate to backing plate and 64" from outside of the drums. >> The stock rear is 62" from drum to drum, width should work fine. Mike Klepp '48 3100 Wichita Falls, TX oletrucks; /html/oletrucks/2001-12/msg00323.html (7,239 bytes)
47. Re: [oletrucks] Fan Clearance (score: 1): Author: MKlepp4335@cs.com; Date: Wed, 19 Dec 2001 12:58:03 EST; << I was thinking that I could create some additional space by setting the radiator INSIDE the radiator brace instead of mounting it on the outside of the support bracket. This could give me as much; /html/oletrucks/2001-12/msg00342.html (7,231 bytes)
48. [oletrucks] Brake parts (score: 1): Author: MKlepp4335@cs.com; Date: Sun, 4 Nov 2001 19:37:27 EST; Just finished converting my from '48 3100 brakes from Huck style to Bendix to match the brakes on the rear axle. The conversion went fairly easy, still have to bleed and adjust this week. (I did seve; /html/oletrucks/2001-11/msg00038.html (7,246 bytes)
49. [oletrucks] License plate restoration (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 12 Nov 2001 19:35:59 EST; Recently there was some references to folks who restore license plates, can someone please refresh me on the sources you know of. The archives are currently down, so I couldn't check there. Thanks. M; /html/oletrucks/2001-11/msg00161.html (6,968 bytes)
50. [oletrucks] License plate restoration (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 13 Nov 2001 12:38:50 EST; Thanks for all the helpful responses to my question on restoring license plates. I appreciate them all. Mike Klepp '48 3100 Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks built between; /html/oletrucks/2001-11/msg00170.html (6,929 bytes)
51. Re: [oletrucks] The cold got to me (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 19 Nov 2001 19:17:15 EST; << The plug, it was pushed out about 1/4 inch from the block on the top and dipped into the block about the same space. I took an oak scrap of flat wood and placed it over the plug and whacked it a f; /html/oletrucks/2001-11/msg00223.html (8,311 bytes)
52. Re: [oletrucks] Lincoln Versaille rear end (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 20 Nov 2001 17:40:53 EST; << I think some rearend spring perches have more than one alignment hole to center the rearend in the fender opening. Maybe you need to drill a different hole to align the spring centering pin to cen; /html/oletrucks/2001-11/msg00240.html (7,140 bytes)
53. Re: [oletrucks] Freeze Plug update (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 20 Nov 2001 17:57:43 EST; << This is what I have done so far. Purchased a new freeze plug for $0.90, this to date is the lowest price thing that I have ever purchased for the truck. Also got some aviation permlux that the guy; /html/oletrucks/2001-11/msg00241.html (8,057 bytes)
54. Re: [oletrucks] 53 Chevy WW (score: 1): Author: MKlepp4335@cs.com; Date: Sat, 24 Nov 2001 16:02:22 EST; << Only complaint on Rain-X is you put it on wet and then buff it when dry. Never can seem to get the streaks out until I've washed the winshield or truck with water at least once. >> After I use Rai; /html/oletrucks/2001-11/msg00294.html (6,987 bytes)
55. Re: [oletrucks] Virus warning. (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 27 Nov 2001 12:32:50 EST; << just received two emails from list members that may not be aware their PC are infected with some sort of macro viruses. The emails came with hidden attachments with names such as "hamster.doc.pif"; /html/oletrucks/2001-11/msg00340.html (7,378 bytes)
56. [oletrucks] Winter in Texas (score: 1): Author: MKlepp4335@cs.com; Date: Wed, 28 Nov 2001 20:22:28 EST; I know all those located in the northern tier of the country expect foul weather this time of year, but here in Texas, our winter doesn't start until January and ends in February, more or less. We h; /html/oletrucks/2001-11/msg00361.html (7,551 bytes)
57. [oletrucks] James Dean Run (score: 1): Author: MKlepp4335@cs.com; Date: Fri, 12 Oct 2001 10:54:13 EDT; Over the 28-30 September, I went to see a car show that I had heard about for many years. It is the "James Dean Run" in Fairmount Indiana. Fairmount is the birthplace and childhood home of James Dean; /html/oletrucks/2001-10/msg00202.html (7,768 bytes)
58. [oletrucks] Swap meet date (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 15 Oct 2001 19:36:53 EDT; For all interested, this weekend is the fall swap meet in Chickasha Oklahoma at the fairgrounds. Chickasha is on I-44 about 20-25 miles south of Oklahoma City. This is a good meet, usually with lots; /html/oletrucks/2001-10/msg00238.html (6,842 bytes)
59. Re: [oletrucks] 53 Carb Question (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 25 Oct 2001 17:34:02 EDT; << I have a 235 and just purchased a new carb from National Auto. The base on the new carb is too big to fit on the bolts on the manifold. >> Sounds like you have a 216 manifold on your 235. Mike Kle; /html/oletrucks/2001-10/msg00335.html (6,952 bytes)
60. Re: [oletrucks] 6 lug later model rear end. (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 25 Oct 2001 17:37:50 EDT; << What would be a 6 lug, exposed drive line rear end for a GMC/Chevy 1/2 ton. >> I used a '62 Chevy truck rear. Same width and bolt pattern as original, but open drive. I had to cut off the original; /html/oletrucks/2001-10/msg00336.html (7,196 bytes)

Current List: 41 - 60
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16]