- 1. manifold studs (score: 1)
- Author: Aaron Whiteman <aaronw@wsu.edu>
- Date: Sun, 16 Feb 2003 10:43:36 -0800
- My '75 B (converted to HIF4 carbs) started making funny pinking noises the other day. A late night investigation revealed that 1 stud holding the intake manifold was missing, another was so loose tha
- /html/mgs/2003-02/msg00295.html (7,637 bytes)
- 2. Manifold studs (score: 1)
- Author: "Chris" <slimyrat@hotmail.com>
- Date: Mon, 24 Feb 2003 13:07:10 +0200
- Hi All ! does anyone know any magic tricks for getting the 6 studs out of the bottom of an exhaust manifold, I've tried penetrating oil and heating with a gas torch, all I've acomplished is breaking
- /html/mgs/2003-02/msg00475.html (7,265 bytes)
- 3. Re: Manifold studs (score: 1)
- Author: "British Classics" <britclass@choicenet1.com>
- Date: Mon, 24 Feb 2003 04:29:06 -0800
- An oxy/acet. torch is my first choice , but you have to be careful and work the studs back and forth to be sure it is properly loosened. Sometimes you must work it a bit and then cool and apply a pen
- /html/mgs/2003-02/msg00478.html (8,357 bytes)
- 4. Manifold studs (score: 1)
- Author: SHolli1018@aol.com
- Date: Mon, 24 Feb 2003 18:22:14 EST
- Hit the same problem on my MGA. I took them to the neighborhood muffler shop. They do this sort of thing every day. I ended up giving the mechanic 10 dollars for his trouble. I believe they tack a p
- /html/mgs/2003-02/msg00494.html (7,199 bytes)
- 5. re: manifold studs (score: 1)
- Author: "mghirsch" <mghirsch@netzero.net>
- Date: Mon, 24 Feb 2003 20:47:51 -0600
- You can also weld a nut to the end of the stud and use a breaker bar. Maynard /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive
- /html/mgs/2003-02/msg00503.html (6,882 bytes)
- 6. RE: Manifold studs (score: 1)
- Author: "mghirsch" <mghirsch@netzero.net>
- Date: Mon, 24 Feb 2003 20:42:25 -0600
- If heating the manifold with an oxyactelene torch till it is red hot (turn the studs while red hot) doesn't work, use a fine flame and blow (melt) them out. If you are careful, you will not damage th
- /html/mgs/2003-02/msg00504.html (7,055 bytes)
- 7. Re: Manifold studs (score: 1)
- Author: "james" <jhn3@uakron.edu>
- Date: Wed, 26 Feb 2003 02:50:02 -0500
- One potential problem with heat is that you need to get it all on the manifold and get the stud moving before the heat soaks into it. Sometimes if the stud gets too hot, usually from repeated heating
- /html/mgs/2003-02/msg00534.html (7,644 bytes)
This search system is powered by
Namazu