- 1. Fire wall/bulk head closure (score: 1)
- Author: "John Morrison" <slomo100@sisna.com>
- Date: Mon, 2 Oct 2006 08:31:13 -0600
- My first post. Somewhere in the project on my BN-7 I have managed to misplace one of the steering column closure plates. I could make one but, if someone has one laying around or if someone makes th
- /html/healeys/2006-10/msg00039.html (6,454 bytes)
- 2. Fw: Fire wall/bulk head closure (score: 1)
- Author: "John Morrison" <slomo100@sisna.com>
- Date: Sat, 7 Oct 2006 07:22:10 -0600
- Hello out there. I sent this out last week and didn't get a response. Is there a source for these little plates? Greetings, My first post. Somewhere in the project on my BN-7 I have managed to mispla
- /html/healeys/2006-10/msg00143.html (6,983 bytes)
- 3. [Healeys] What is the proper thread form for the studs on a 100M (score: 1)
- Author: John Morrison <slomo100@sisna.com>
- Date: Mon, 9 May 2011 21:01:27 -0600
- I don't like the feel of a 1/4-28 nut on these studs. _______________________________________________ Healeys@autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $12.75 A
- /html/healeys/2011-05/msg00126.html (6,444 bytes)
- 4. [Healeys] Corrosion on carburetor piston tube (score: 1)
- Author: John Morrison <slomo100@sisna.com>
- Date: Tue, 5 Jul 2011 13:25:23 -0600
- I have a 100M carburetor that has just been rebuilt. Problem is that the rebuild found a problem with one of the pistons. It has had some corrosion on the follower so a set of chambers and pistons w
- /html/healeys/2011-07/msg00156.html (7,243 bytes)
- 5. [Healeys] Transmission rebuild (score: 1)
- Author: John Morrison <slomo100@sisna.com>
- Date: Wed, 3 Aug 2011 22:11:49 -0600
- I have a BN7/BT7 transmission that has been taken apart and is now reassembled. Problem: When the bell housing is tightened up the trans won't go into neutral. If the cap screws are loosened 3/4 turn
- /html/healeys/2011-08/msg00073.html (6,970 bytes)
This search system is powered by
Namazu