All,
I have a 100M carburetor that has just been rebuilt. Problem is that
the rebuild found a problem with one of the pistons. It has had some
corrosion on the follower so a set of chambers and pistons were
substituted from a TR.
The chambers from the TR will work but they are not correct for the 100M.
Is there a carb rebuilder out there that can replace and fit the corroded tube?
John Morrison
100M
BN7
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|