- 1. Exhaust Gas Temperature Gage (score: 1)
- Author: WEmery7451@aol.com
- Date: Tue, 3 May 2005 01:09:56 EDT
- Dear FOT, I finally got around to installing an exhaust gas temperature gage, with sensors in the Number 1 and Number 4 exhaust manifold pipes. The two scales on the gage range from 8 to 16 degrees F
- /html/fot/2005-05/msg00018.html (8,171 bytes)
- 2. Re: Exhaust Gas Temperature Gage (score: 1)
- Author: "John W" <john@race-dogs.com>
- Date: Mon, 2 May 2005 22:43:53 -0700
- Couple of questions? What type of probes you using ?? There are 3 types in the std. K model. Mostly the difference is how fast they react and how long they last - The most sensitive ones are the one
- /html/fot/2005-05/msg00019.html (10,212 bytes)
- 3. Re: Exhaust Gas Temperature Gage (score: 1)
- Author: "Jack W. Drews" <vinttr4@geneseo.net>
- Date: Tue, 03 May 2005 06:01:51 -0500
- Mine also shows no gauge reading at idle. The needles are rather slow to respond and take a few seconds to catch up to what's going on in the pipes. At full song on a long straight several of us see
- /html/fot/2005-05/msg00021.html (8,881 bytes)
- 4. Re: Exhaust Gas Temperature Gage (score: 1)
- Author: "John W" <john@race-dogs.com>
- Date: Tue, 3 May 2005 13:04:10 -0700
- WOW - 1600 degrees - Where are your probes ? - Mine are 2.5 " from the exhaust port From all my research - Much over 1400 degrees and I was told you should start being worried Plus my plugs, tail pip
- /html/fot/2005-05/msg00037.html (9,741 bytes)
- 5. Re: Exhaust Gas Temperature Gage (score: 1)
- Author: "Jack W. Drews" <vinttr4@geneseo.net>
- Date: Tue, 03 May 2005 20:56:38 -0500
- I have an analog EGT setup, made by Westerburg, sold by Pegasus. My probes are in the #1 and #4 pipes, about 6" away from the face of the head, per manufacturer's instructions. Kas has since pointed
- /html/fot/2005-05/msg00049.html (10,832 bytes)
- 6. Re: Exhaust Gas Temperature Gage (score: 1)
- Author: WEmery7451@aol.com
- Date: Wed, 4 May 2005 00:55:54 EDT
- << Couple of questions? What type of probes you using ?? There are 3 types in the std. K model. Mostly the difference is how fast they react and how long they last - The most sensitive ones are the o
- /html/fot/2005-05/msg00057.html (8,033 bytes)
This search system is powered by
Namazu