Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Thu, 1 Nov 2007 20:07:07 -0400
I didn't even need to go this far! My Comp springs and a SLIGHT tap of a hammer on the castle nut supplied plenty of pressure to pop em right off without boogering the threads! Wahoo! Turns out my up
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sat, 3 Nov 2007 05:58:56 -0400
Hi all who replied, I have offered them to the person who first replied. If he decides he doesn't actually need them, I'll work my way down my list of replies. Thanks all! Matt ______________________
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Thu, 8 Nov 2007 09:49:21 -0500
Hi All, Up I-75 from Chattanooga to Hwy 74 into Ducktown, North on Hwy 68 thru Turtletown to Tellico Plains, East on Hwy 165 (Cherohala Skyway, which becomes Hwy 143 at NC border) to Hwy 129 north, U
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Tue, 13 Nov 2007 18:21:13 -0500
I haven't been online for a few days, or I could have fixed this for you immediately. Sorry. The driver's door on Loreli did this a few different times after I first bought her. Had to pull the door
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Tue, 13 Nov 2007 20:20:32 -0500
The .410 with birdshot is good for an MG, Triumph, or VW at close range. To take down a Lincoln, ya need a 10 gauge with a slug. That'll take the "nuts" off ANYTHING... and stop that Lincoln in its d
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Thu, 15 Nov 2007 09:02:37 -0500
I emailed you a picture that I found on an eBay auction, showing both a Solex carb, and a Hitachi carb. Your email is a little confusing in that you mention "carb", not "carbs". If you have one, not
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Mon, 19 Nov 2007 10:46:32 -0500
Hi folks, Anyone know what the final sale price of the U20 engine in Florida was? I forgot to "watch" it, so I missed out. Matt ________________________________________ Datsun-roadsters mailing list
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Mon, 19 Nov 2007 11:46:23 -0500
Did you all see that the Cannonball Run has a new record? Manhattan, NY to Santa Monica, CA in 31 hrs 4 min. Here's a link, if you missed it: http://www.wired.com/cars/coolwheels/magazine/15-11/ff_ca
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Mon, 19 Nov 2007 12:26:00 -0500
This is too weird. Craig found it. I can't. Apparently Tim can't either. It was for a U20 with approx 76,000 miles on it, removed for a SR20 swap. Used all the tips I got (such as the "completed item
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Tue, 20 Nov 2007 18:08:15 -0500
I carry a very small, light floor jack. I don't trust the "dent maker" ones. The extra weight is minimal, since it is aluminum. So it doesn't damage my quarter panel, I keep it wrapped in a sheet of
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Fri, 11 Jan 2008 14:41:13 -0500
Wow Keith! Are you thinking about hitting both? What a week that would be!!! Wish I were rich so I could join ya! If you go, I know ALL the great stuff to do and the best surfing spots in Santa Barba
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Fri, 11 Jan 2008 20:54:30 -0500
This is long, but hopefully informative. This is MUCH easier on a vinyl top than a canvas one. It's also easier in a WARM garage. I have canvas and don't have a garage. I wait for a warm day or drag
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sun, 13 Jan 2008 11:03:40 -0500
Hi Guys, Chattanooga, TN 12/31/07 - Took a very nice leisurely drive in Loreli into the hills above the city (Signal Mountain) with the top down and wearing a t-shirt and shorts. LOVED IT!!! Chattano
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sun, 13 Jan 2008 12:51:42 -0500
Hi All, Does anyone know if the slanted "DATSUN" emblem for an early 240Z has the same mounting pin locations as the un-slanted "DATSUN" emblem for a 70 SRL? This is for the fender. I lost one just b
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Fri, 18 Jan 2008 08:04:12 -0500
Oops, forgot to add "the list" address to my reply... it's early. Hi Dave, I like this idea. Going to go to the junk yard this weekend and see if I can find any to experiment with. Everyone, Here's t
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sun, 20 Jan 2008 19:01:07 -0500
Hi Eric and List, This comes under the heading of "other idea" I guess. Is there a similar issue with "new" style Solexes? I have had somewhat of a problem with Loreli. I don't get proof of running r
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Thu, 24 Jan 2008 11:52:30 -0500
I know it's been a while since this subject, but here goes. I have this exact jack in Loreli's trunk: http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200313500 _200313500 I also c
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sat, 26 Jan 2008 14:49:38 -0500
Linda wrote: "I used the generic Covercraft car cover for a small car, sized for a Mazda Miata they said, and it fits fine." Please remember that you're looking at a car cover. Its overall size and S
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sat, 26 Jan 2008 15:51:47 -0500
Hi folks, Loreli's U20 "heart" has begun to have a "murmur". I noticed a rather loud noise (this came after a few days of having "fun" on some wet streets and parking lots). This isn't a little rattl
Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Sun, 27 Jan 2008 07:56:39 -0500
A while back I purchased studs and nuts from Dean. Part numbers 1545 and 1842, respectively. These were put on my '70 SRL with 15" Panasports. They fit perfectly. Matt --Original Message-- From: dats