- 21. Re: Rear jackshaft oil holes? (score: 1)
- Author: JOver4X4@aol.com
- Date: Fri, 28 Jan 2005 16:02:50 -0500
- I had the machine shop that sleeved and bored my cylinders install my cam bearings. Of course I had the same problem as you...they installed the rear bearing wrong so only two holes were lined up. I
- /html/datsun-roadsters/2005-01/msg00315.html (7,010 bytes)
- 22. Re: Window cleaning (score: 1)
- Author: JOver4X4@aol.com
- Date: Thu, 11 Nov 2004 12:32:51 -0500
- I recall a discussion recently about this. It seems that Mothers Mag Polish meant for aluminum wheels works the best. Lay the window to be cleaned on top of a towel on a hard floor and scrub with a p
- /html/datsun-roadsters/2004-11/msg00106.html (6,864 bytes)
- 23. Re: tail lens (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 20 Nov 2004 10:04:27 EST
- I have a taillight lens I would be willing to give you. Let me know if it is still needed. John Over 68 2000 Denver
- /html/datsun-roadsters/2004-11/msg00206.html (6,366 bytes)
- 24. wheel hub adapter (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 20 Nov 2004 14:24:56 EST
- Does anyone know where I can purchase a hub to mount a momo steering wheel to my 2000? TIA John Over Denver
- /html/datsun-roadsters/2004-11/msg00208.html (6,182 bytes)
- 25. Re: EMPI lug nuts (score: 1)
- Author: JOver4X4@aol.com
- Date: Sun, 3 Oct 2004 21:10:27 EDT
- I am also running Empis and ran into the same problem. My problem started when I bought two sets of three wheels. One set was the early type and one was the later type. I am not sure which style is
- /html/datsun-roadsters/2004-10/msg00033.html (8,759 bytes)
- 26. RE: dyno time! (score: 1)
- Author: JOver4X4@aol.com
- Date: Tue, 12 Oct 2004 19:22:02 -0400
- I have been thinking about Dan's interesting question. Why did my car only show a few horsepower more than Tom Hoagland's A cammed Solex engine? I am driving a 6 blade plastic fan. I am not running a
- /html/datsun-roadsters/2004-10/msg00177.html (8,649 bytes)
- 27. bad ebay transaction (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 23 Oct 2004 00:15:47 EDT
- After over 150 positive e-bay transactions I have had my first sour apple. I bought a Momo steering wheel for my car. The seller stated it was open box and it was in good condition. In the subject l
- /html/datsun-roadsters/2004-10/msg00331.html (7,686 bytes)
- 28. Re: Battery, hold-down & tray for 1970 2000 (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 23 Oct 2004 15:26:18 EDT
- A group 51 battery fits the shelf very nice. It is narrow and allows access to the oil filter. I have not found a battery tray yet, and, I have made my own hold down out of billet aluminum. Check out
- /html/datsun-roadsters/2004-10/msg00342.html (7,149 bytes)
- 29. (OT) Maxima computer chip key (score: 1)
- Author: JOver4X4@aol.com
- Date: Fri, 29 Oct 2004 23:05:09 EDT
- We recently purcahsed a used '02 Maxima for a daily driver and only received one key. We don't really want to spend $100 at the dealer to get a 2nd key made. I have seen some "repro" chipped keys on
- /html/datsun-roadsters/2004-10/msg00431.html (6,972 bytes)
- 30. transmission gear lube (score: 1)
- Author: JOver4X4@aol.com
- Date: Thu, 2 Sep 2004 22:22:27 EDT
- I am ready to fill my freshly rebuilt servo-type 5 speed with fluid. I would like suggestions on what to use. I know some of you use redline, synthetics, etc. I have also heard to use standard 90W g
- /html/datsun-roadsters/2004-09/msg00022.html (7,686 bytes)
- 31. Re: transmission gear lube (score: 1)
- Author: JOver4X4@aol.com
- Date: Fri, 03 Sep 2004 21:24:24 -0400
- Thanks all for the input. It seems to be the consensus to run standard gear oil (and engine oil) for the first 1000 miles and then switch to synthetics. That's what I will do! Thanks again, John
- /html/datsun-roadsters/2004-09/msg00045.html (7,534 bytes)
- 32. minor details (score: 1)
- Author: JOver4X4@aol.com
- Date: Fri, 3 Sep 2004 21:29:39 EDT
- While trying to tie up all the loose ends to get my car on the road this weekend I have come to figure out that my brake lights stay on all the time. For the time being I have unplugged the switch.
- /html/datsun-roadsters/2004-09/msg00049.html (7,064 bytes)
- 33. (no subject) (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 4 Sep 2004 15:01:29 EDT
-
- /html/datsun-roadsters/2004-09/msg00062.html (6,060 bytes)
- 34. brake light switch rubber (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 4 Sep 2004 15:05:13 EDT
- Thank you to all of you who replied and gave me ideas for the brake light switch pusher. For now I have put a 1/4-20 hex bolt through the hole and adjusted the switch so it works. In the future (hope
- /html/datsun-roadsters/2004-09/msg00063.html (6,665 bytes)
- 35. RE: wheels, rims (score: 1)
- Author: JOver4X4@aol.com
- Date: Thu, 09 Sep 2004 13:54:23 -0400
- Speaking of tires, I just ordered a set for road use. I ordered Yokahama AVS ES100s to run on 14" Empis. Does anyone run these tires and can you give me an opinion? They were a bit pricier than the
- /html/datsun-roadsters/2004-09/msg00110.html (7,346 bytes)
- 36. lugnuts (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 11 Sep 2004 23:01:39 EDT
- I am preparing to install Empi wheels on my car and have noticed they take an oddball lugnut. I need to find a shouldered style mag lug nut with a shank of about .625". After checking several places
- /html/datsun-roadsters/2004-09/msg00129.html (6,581 bytes)
- 37. fresh start up (score: 1)
- Author: JOver4X4@aol.com
- Date: Sat, 14 Aug 2004 13:35:34 EDT
- List and WYCROCers, I started my fresh U20 with Solexs this am. It tried to fire immediately, chugged a bit until the float bowls were full and took off. After over a year of sporatic work it gives m
- /html/datsun-roadsters/2004-08/msg00306.html (6,781 bytes)
- 38. datsun article (score: 1)
- Author: JOver4X4@aol.com
- Date: Fri, 27 Aug 2004 00:23:39 EDT
- Found a short history of Datsun/Nissan Motor Corp. while surfing the web tonight. They leave out details of the roadster but it is still interesting. http://www.grandpasoldcars.com/articles_datsun.ht
- /html/datsun-roadsters/2004-08/msg00487.html (6,413 bytes)
- 39. heater hose (score: 1)
- Author: JOver4X4@aol.com
- Date: Thu, 15 Jul 2004 13:13:09 -0400
- I am finishing the final details on my U-20 Solex engine. I have just ordered a heater hose from the dealer for an SU engine as the Solex hose is NLA. (This is the long curvy hose that runs from the
- /html/datsun-roadsters/2004-07/msg00219.html (6,651 bytes)
- 40. Re: Engine Paint Color (score: 1)
- Author: JOver4X4@aol.com
- Date: Fri, 23 Jul 2004 23:28:46 EDT
- If close will work Dupli-color makes an engine paint in Chevrolet Blue. The old Chevrolet Blue Flame 6 cylinder engines in the mid to late 50s were painted blue. This is very close to the original Da
- /html/datsun-roadsters/2004-07/msg00367.html (7,171 bytes)
This search system is powered by
Namazu