75 hp? Nissan's second dumb move. What were they thinking? Linda "Does the Figaro engine fit in the Roadster?" At 75 hp, why would you want to? It would take two of those to equal a good-running Sole
In case some of you missed it, on the 311 list a guy named Eddie, (handle, eddietude), has remanufactured some A Arm shafts for a reasonable price. Anyone wanting to order should order now, right awa
How long should the oil last? Can it leak out? Thanks, Linda It takes about a tablespoon of oil. If you look on the "tighten by hand" it should have level marks. If not look down the hole and you wi
There can be quite a bit of gunk in the fuel lines even when the tank has been cleaned, that was the case for me ( I used GasTank Renu service) The surprising thing is how long it can take for bits
Eddie on the 311 list has posted an update on the lower A Arm Shafts he is manufacturing: http://www.311s.org/phpBB3/viewtopic.php?f=2&t=8559&start=0&st=0&sk=t&sd=a&sid=81f6448b976950a44f98dfc46bdc7
Is this then, a good idea to do to really flush the system, even if you are replacing the fluid with Dot 3? Does it flush contaminants better for instance? With speed bleeders it is not too hard to f
Try GraphicConverter if you have a Mac. Excellent, cheap. Linda Thank you Mark, and all that replied! I have used the one Mark Sedlack sent. You were correct. My plans include cutting vinyl for a de
Isn't it possible to tell if it is aluminum or iron from the outside, without removing and without referring to the engine numbers, since the head could have been changed anyway? Linda Mine has rust,
A magnet ,of course. Sure. A magnet will stick to an iron head, not to aluminum. -- John John F Sandhoff sandhoff@csus.edu Sacramento, CA ________________________________________ Support Team.Net htt
You might try restoring it piece by piece without tearing everything apart as Matt pointed out. It may seem less efficient but you still can drive, or at least drive sooner. Linda piece by piece Rich
You might want to go to 311 and try to find owners who live near you, and there are a few as I recall. I shipped some parts up there. Another owner can help immensely in helping you work on your own
The 311 site has a PDF file for all Gates belts and hose numbers. Go to Linda I have reversed my altenator to the driverside and dont know what belt to buy i tried the 7340 but it is too short any cl
Which fitting are you using? If you could post a pic somewhere that would be good to see. thanks, Linda Group, Thanks for the replies. There's only one threaded fitting on the front of the intake ma