vintage-race
[Top] [All Lists]

Re: [Vintage-race] Torque wrench recommendations?

To: John.Desantis@Inficon.com
Subject: Re: [Vintage-race] Torque wrench recommendations?
From: Chris Thompson <chris@cthompson.net>
Date: Tue, 02 Dec 2008 18:49:00 -0500
Sears warrants torque-wrenches for only one year.  I let a bud borrow 
mine several years ago, and he broke it.  It was about a year and a week 
from when I bought it, and Sears replaced it.....

Chris
Lotus, Jaguar, Tiger

John.Desantis@Inficon.com wrote:
> Sounds like the Craftsman served you well - why not get another.  I like 
> mine as well.
>
> Are they covered by there lifetime tool guarantee?  Ya might get on for 
> free.
>
>
> John DeSantis
> Inficon
> Phone 315-434-1196
> Fax 315-434-9908
> ***********************************************************************
> NOTICE: - This message including any attachments is intended only for the 
> use of the designated recipient(s) named above and may contain 
> confidential information protected by law.  If you are not the intended 
> recipient, you are hereby notified that any disclosure, copying, 
> distribution, or the taking of any action in reliance on the contents of 
> this information is strictly prohibited.  If you have received this 
> transmission in error, please notify the sender immediately by e-mail and 
> delete the original message including any attachments.
> *********************************************************************** 
>
>
>
>
> Rick Gurolnick <NeotoyRick@comcast.net> 
> Sent by: vintage-race-bounces@autox.team.net
> 12/02/2008 10:12 AM
>
> To
> "vintage-race@autox.team.net" <vintage-race@autox.team.net>
> cc
>
> Subject
> [Vintage-race] Torque wrench recommendations?
>
>
>
>
>
>
> After 20+ years of tightening everything on a vintage racecar from 
> head bolts to literally hundreds, if not thousands of brake bleeding 
> accessed lug nuts, the end of my Craftsman Click type torque wrench 
> broke off and went flying across the garage. An appropriately dramatic 
> end to an incredible tool career.
>
> Any recommendations and/or links for a new updated torque wrench? 
> Typical usage has been for the notorious 95 ft/lbs lug nuts.
>
> Thanks in advance,
>
> Rick Gurolnick
> You are subscribed as john.desantis@inficon.com
>
> Vintage-race@autox.team.net
> http://autox.team.net/mailman/listinfo/vintage-race
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as chris@cthompson.net
>
> Vintage-race@autox.team.net
> http://autox.team.net/mailman/listinfo/vintage-race
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Vintage-race@autox.team.net
http://autox.team.net/mailman/listinfo/vintage-race

<Prev in Thread] Current Thread [Next in Thread>