vintage-race
[Top] [All Lists]

Re: [Vintage-race] Torque wrench recommendations?

To: NeotoyRick@comcast.net, vintage-race@autox.team.net
Subject: Re: [Vintage-race] Torque wrench recommendations?
From: N197TR4@cs.com
Date: Tue, 2 Dec 2008 10:36:32 EST
Hi Rick,

Our Craftsman gave up the ghost this fall. I looked on eBay and found a good 
used SK. I have a bid on it now. Should come in slighty under $100 for a 
slightly used $250 torque wrench. Just another thought.

Sears had Craftsman on sale for $59 but I decided against it.

Joe Alexander
VSCDA

> After 20+ years of tightening everything on a vintage racecar from  
> head bolts to literally hundreds, if not thousands of brake bleeding  
> accessed lug nuts, the end of my Craftsman Click type torque wrench  
> broke off and went flying across the garage. An appropriately dramatic  
> end to an incredible tool career.
> 
> Any recommendations and/or links for a new updated torque wrench?   
> Typical usage has been for the notorious 95 ft/lbs lug nuts.
> 
> Thanks in advance,
> 
> Rick Gurolnick
> _______________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Vintage-race@autox.team.net
http://autox.team.net/mailman/listinfo/vintage-race

<Prev in Thread] Current Thread [Next in Thread>