vintage-race
[Top] [All Lists]

HELP

To: vintage-race@autox.team.net, british-cars@autox.team.net,
Subject: HELP
From: TJAZZED@aol.com
Date: Wed, 14 Jun 2000 12:59:50 EDT
Hi Listers
Sorry to bomb lists again but, I need some info so I can complete my little 
project.

History:
I have replaced the clutch, and various other parts, seals, shaft, fork and 
bushings in the trans on my 1963 tr4.  I have also had to replace the drive 
shaft. 

Now its time to reassemble everything.  I want to do this right.  I have 
learned a few tricks by reading and posting to this list and at the risk of 
pestering you all once again, I have five more questions for you experienced 
LBC mechanics and /or tr4 owners out there.

1. What are the torque specs for the bolts that hold the clutch pressure 
plate to the flywheel? In lb. ft. Please.

2. What are the torque specs for the bolts that hold the drive shaft flanges 
to the trans and diff?

3. What are the torque specs for the bolts that hold the bell housing to 
engine?

4.What are the widest tires (any brand recomendations?) I can put on my five 
original solid metal 15 "wheels? [ I believe they are 4.5 inches wide) I may 
be interested in selling these.  E-mail me if interested.  tjazzed@apple.com  
or  tjazzed@aol.com

5. Do I need tubes if I decide to run the stock 15" x4.5" wheels?  

Thanks in Advance   = )
Tony
1963 tr4 ct 18730, 


<Prev in Thread] Current Thread [Next in Thread>
  • HELP, TJAZZED <=