Eric,
I believe that Nisonger can rebuild or replace your tach to work with any modern
ignition.
http://www.cobracountry.com/nisonger/home.html
Phone 914-381-1952 (NY)
Give them a call.
Craig Wright
Eric Camiel wrote:
> I installed a Lucas CD ignition and hall effect distributor as used on many
>race cars
> on my S1 Elan with a Hart twink and it was a huge improvement. However, the
>early
> Smith's tack ( the kind with the coil wire making an external loop thru the
>tack ) of
> course dosen't work. In fact, it never was very consistant despite frequent
> callibration. I think it was tempreture sensitive. Any suggestions? How about
>modern
> aftermarket tacks. Also, what rev limitors work with this setup?
> Thanks
> Eric
--
**********************************************************************
Craig Wright Product Design Group, Inc.
craig@p-d-g.com 4635 Viewridge Ave.
(619) 569-3484 x309 San Diego, CA 92123
fax: (619) 569-3490 http://www.p-d-g.com
**********************************************************************
|