vintage-race
[Top] [All Lists]

Re: Sand cast Webers and allthese oil leakers at Mid-OH!

To: 110420.3466@compuserve.com, emanteno@ibm.net, simon@mondes.com,
Subject: Re: Sand cast Webers and allthese oil leakers at Mid-OH!
From: DonJQueen@aol.com
Date: Wed, 10 Mar 1999 11:09:10 EST
The Triumph shop manual states that a cotter pin should be allowed to rattle
around in the hole at the bottom of the bell housing to keep it clear to allow
oil leaking from the rear seal to pass through and drain out. Now there's
defeatist engineering !

<Prev in Thread] Current Thread [Next in Thread>