I would think some kind of bead blasting would give the most uniform appearance.
I?ve also had good luck with this:
https://www.napaonline.com/en/p/MCR1458
<https://www.napaonline.com/en/p/MCR1458>
-Darrell
> On Mar 21, 2018, at 6:59 AM, Wbeech at flash.net <wbeech at flash.net> wrote:
>
> Hello List,
> Continuing to clean up the TR3 motor and would like to polish the intake
> manifold beyond the standard dull/dirty gray. Tried with the the Dremel
> using a steel and brass brush wheel and while is puts since shine every pass
> leaves a line/trail. Any suggestions to achieve a uniform finish without
> going to a paint or coating of any sort.
>
> Thanks,
> Bill B
> TS30800L
>
> Sent from my Apple II+
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/darrellw360 at mac.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180321/995b94e6/attachment.html>
|