Re: [TR] TR2/3 stator tube - nut.

[rod Trunnell <rgt2@sbcglobal.net>]

I have used the olive from my local hardware store and have not experienced
any leakage or other issues with them.  I don't recall the size off the top of
my head.

Rod Trunnell
62 TR3B. TCF1037l


On Aug 4, 2012, at 10:05 AM, "Wbeech" <wbeech@flash.net> wrote:

> If the Nut is OK, and the tube is not compressed, just a new olive as they
> can wear out.  $2 at TRF, have not looked at the local HW store to see if
> the sizes match, maybe someone else has?
> Bill
>
> -----Original Message-----
> From: triumphs-bounces@autox.team.net
> [mailto:triumphs-bounces@autox.team.net] On Behalf Of Angelo Graham
> Sent: Saturday, August 04, 2012 11:48 AM
> To: triumphs@autox.team.net
> Subject: [TR] TR2/3 stator tube - nut.
>
> Hello List:
> Getting slight weeping from the end of the stator tube on my '2 and I
> may have overtightened the nut in efforts to stop the leaking. Is this
> nut a 'specialty' item or can it be sourced from local hardware
> suppliers as a compression nut? Same question for the olives. Have seen
> the information on the olives for the hard gas lines in the 2/3s and
> wondering if the same holds for the stator olive.
> Thanks for any insight into this one.
> Angelo Graham
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/rgt2@sbcglobal.net

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net