Re: [TR] TR2/3 stator tube - nut.

["Wbeech" <wbeech@flash.net>]

If the Nut is OK, and the tube is not compressed, just a new olive as they
can wear out.  $2 at TRF, have not looked at the local HW store to see if
the sizes match, maybe someone else has?
Bill

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Angelo Graham
Sent: Saturday, August 04, 2012 11:48 AM
To: triumphs@autox.team.net
Subject: [TR] TR2/3 stator tube - nut.

Hello List:
Getting slight weeping from the end of the stator tube on my '2 and I 
may have overtightened the nut in efforts to stop the leaking. Is this 
nut a 'specialty' item or can it be sourced from local hardware 
suppliers as a compression nut? Same question for the olives. Have seen 
the information on the olives for the hard gas lines in the 2/3s and 
wondering if the same holds for the stator olive.
Thanks for any insight into this one.
Angelo Graham

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net