Re: [TR] ignition lock barrel

["Greg Gelhar" <greg@gelhar.com>]

Yes, it that easy but you must have the key in the barrel. With the key in 
the barrel, pushing the pin in the side hole will allow you to withdraw the 
tumbler.

Greg G.
Osseo, MN



----- Original Message ----- 
From: "Gary Nafziger" <nafzigerg@yahoo.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, July 10, 2012 4:10 PM
Subject: [TR] ignition lock barrel


> Just received a new ignition switch for tr-3 and the barrel is separate 
> from
> the switch. Just wondering how to install the 
> barrel..................shove
> in?  shove in and turn?  poke something into little hole in the side of 
> the
> switch which might release something to allow the barrel to slide in? 
> Just
> wondering.
>
> gary n.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/greg@gelhar.com
** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net