> Anyone know if the thermostat for the Ferguson TEA20 tractor
> is the same skirted model as for the 2-4A engine?
That photo is certainly different, and I don't think would work properly in
a TR thermostat housing. The wax pellet (darker brass housing in the
center) needs to be on the engine side of the thermostat so it senses the
water temperature inside the engine; and the TR bypass is on the same side
(which is more or less where it has to be to bypass the thermostat).
I could be mistaken, but I believe what appears to be the sleeve in that
photo is actually the water valve, not intended to block off a bypass. I
use a somewhat similar unit from Robert Shaw (when I can find them):
http://i8.ebayimg.com/02/i/000/b4/50/2d53_1.JPG
-- Randall
|
