Clarification ..the modern thermostats allow some flow when cold. I was
worried it was not enough flow if the bypass was fully blocked off....
On Nov 25, 2011 7:08 PM, "Chris Simo" <ccsimonsen@gmail.com> wrote:
> I blocked my bypass partially. Based on some posts on this list I think
> the head needs a little more flow at cold than they supply.
>
> I need to go back and do it proper but here's what I did to my bypass ...I
> took an old tiawan socket that just fit in the bypass hose and stuck it in.
> It had about a 3/8 diameter hole through it....
>
> Seems to do the trick.
> On Nov 25, 2011 6:58 PM, "Hdefer" <tr3@roadrunner.com> wrote:
>
>> I recently put in a new improved radiator (no crank hole) and am having a
>> hard time getting up to anywhere near the 180 deg. temp. for my TR3A to run
>> properly. Consequently, I have to run with the "choke" pulled out, unless
>> the outside temp. is 80 + degrees. I have a non-skirted 180 deg. thermostat
>> with the by-pass partially plugged as was recommended by someone from the
>> list. This made me conclude that skirts should not only be on the fairer
>> sex and Scotsmen but also on TR3 thermostats. Last time I checked in the
>> Moss catalog (the only one I could find that is still selling them) the
>> cost was $115+ with tax and shipping. Looking at the thermostat that I
>> have, it looks like modifying it with a skirt , would be quite doable. Has
>> anyone any info. on this?
>> Hans
>> TR3A
>>
>>
>> triumphs@autox.team.net
>>
>> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>>
>options/triumphs/ccsimonsen@**gmail.com<http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com>
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|