I would start with the cleaning as Dave suggests. But I would probably test
which grade w/d to start with on a hidden spot. 1000 grit or even higher might
do the job with less abrasiveness. Real fine grade steel wool is another
option.
C
Jun 9, 2011 12:09:02 PM, Dave1massey at cs.com wrote:
In a message dated 6/8/2011 9:37:16 PM Central Daylight Time, thenicholls at
verizon.net writes:
I am a bit of a clean freak. I have a Bell stock stainless steel exhaust
system on my 72 TR6 installed in 2006. I would like to cleanup the visible
pipes, anyone on the list have any advice on cleaning stainless steel? Anyone
worked with any cleaning products?
I would first clean off any oil or grease with a good detergent. What is left
is backed on carbon and corrosion. That I take off with #400 wet/dry
sandpaper. Depending on how shiny you want you can clean up with #600 and
#1000 grit w/d sandpaper after that.
Dave
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/cfmtr3a at
verizon.net
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|