> What would happen if under those conditions, one were to spray the fuel
> lines, possibly the float bowls, with a product like Dust Off? It's
> basically compressed air, but gets very cold when used.
Might work, if you could get the liquid from the can onto the carb surface.
But if you let it boil inside the can as it usually does, I think it will take
an awful lot of it to cool the float bowls by much.
How about a 12v Peltier cooler instead?
Probably easier to just convert to fuel injection and be done with it ;)
-- Randall
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|