Frank,
I think you are asking if it can be done without pulling the engine. I
asked this question last year and the overwhelming sentiment was to pull the
motor & trans. While it CAN be done in-situ, the effort and headaches make
pulling the engine a much easier option.
And yes, I pulled the engine/trans as a unit then when in to replace the
modern MOSS oil seal.
Bill
Bill Beecher
'58 TR-3A TS30766L "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Frank Fisher
Sent: Tuesday, February 22, 2011 7:28 PM
To: triumphs at autox.team.net
Subject: [TR] rear oil seal TR3
has any one attempted to change out the modern rear oil seal on the TR3
motor?
i know trans comes out.
tough job im sure.
impossible?
Frank
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|