triumphs
[Top] [All Lists]

Re: [TR] TR3 Soft Top Forward Fasteners

To: triumphs@autox.team.net
Subject: Re: [TR] TR3 Soft Top Forward Fasteners
From: Bob <yellowtr@adelphia.net>
Date: Sun, 12 Dec 2010 09:22:30 -0500
On Saturday, December 11, 2010 10:19:22 pm William Brewer wrote:
>      When I installed my TR3A soft top I didn't do anything with the funny
> padded flap above the windscreen. The general consensus was that it was to
> aid in sealing the top to the windscreen and the snaps should be going
> through it. Do the lift-a-dots connect to it as well or do you punch holes
> through it and snap the snaps through it? If the latter, what size holes
> did you punch? TIA,
> 
>      Bill in Tehachapi
Bill,

I think the correct method is to punch a hole through the seal big enough for 
the tentax to attach to its post. I am guessing about 1/2" diameter. The 
tentax is not attached to the seal.

Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>