> It has "ear com neg" written vertically on the side of
> the can. Not
> sure how that might relate to the terminals on the bottom.
That means that the mounting tabs are also the negative terminal.
> There are three spade connectors equidistantly spaced just
> inside the outer
> edge of the capacitor base
Those are the mounting tabs, so negative.
> and one longer wire connector more inboard.
Which will be the positive.
> With no power to the radio but the power switch "on" and the
> polarity switch
> set "up" all three spade connectors show a direct connection
> to the power
> lead and the wire connector shows a direct connection to the
> chassis.
So that is the positive ground configuration.
> With
> the polarity switch flipped "down" the three spades now show a direct
> connection to the chassis and the wire connector shows a
> direct connection
> to the power lead.
For negative ground.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|