The Girling single cylinders, I assume. Depress the spring slightly,
and lever the little tab in the thin steel cup, bit outward.
Peter C
=
At 11:43 AM 8/4/2010, Angelo Graham wrote:
>Hello List:
>Picked up some rebuild kits for the brake and clutch m/cs. for the
>TR4 style individual cylinders/reservoirs. Trying to figure out how
>the spring/piston assemblies come apart to fit the new seals. Any
>tips on how to release the piston from the spring? No instructions
>with the kits and my first look at these cylinders.
>Thanks for any help with this.
>Angelo Graham
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|