> Any tips on
> how to release the piston from the spring?
Look through the spring at the metal "thimble" on the piston inside the
spring. On one side of the thimble is a rectangular prong that sticks down
inside the thimble. If you gently pry up on that prong, it should release
the thimble from the piston. With the piston out of the way, you can move
the rod to the side, which will release the thimble and spring.
Check out Nelson's "Clutch Hydraulics" article on the Buckeye Triumphs site.
The TR6 clutch MC is basically identical to the TR4 brake & clutch MCs.
http://www.buckeyetriumphs.org
-- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|