Ok, now I am in quandry. My 62 TR4 came with 4 inch steel wheels, which I
thought were correct for TR2-3. The TRA concours guidelines stated the TR4
came with 4 1/2 inch steel wheels. However, a few original literature pieces
I have looked at mention the 4 inch steel wheels as standard on the TR4.
These are the wheels that are riveted together. A club member mentioned that
the TR250 came with 4 1/2 inch steel wheels that were welded and not riveted.
Does this sound right to folks?
I have a set of both right now and plan on using the wider 4 1/2 inch rim so
I can put 185 width tires on.
Thanks,
Jim Henningsen
Maitland, FL (oppressive heat - that was the forecast in the paper!)
62 TR4 CT5212LO
75 TR6
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|