triumphs
[Top] [All Lists]

Re: [TR] Bumpers for TR3 solid axle

To: Triumphs <Triumphs@autox.team.net>
Subject: Re: [TR] Bumpers for TR3 solid axle
From: Geo Hahn <ahwahneetr@gmail.com>
Date: Tue, 8 Jun 2010 19:19:32 -0700
On 6/8/10, Randall <tr3driver@ca.rr.com> wrote:
> On the rear suspension plate, item 33:

Yep.  I finally replaced mine when I had the exhaust system removed...
would have been tricky to get at the LH one with the muffler in place.
 They come (from Moss)already split.  As I recall I used a big zip-tie
around the fattest part of the buffer to hold it in place while it did
the twisty wire on each side... then cut and removed the zip tie when
done.

Geo

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>