Hi all, rebuilding my rear springs, yes I got the fever from all the threads,
and found I have no bumpers at all. I see Moss has 3 bumpers listed and don't
have a clue where they go or even if they are for my car or the TR4 solid
axle.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29143#76
They list #81 Bump rubber (on body), #82 rebound rubber (on frame) and #85
Buffer (on ???) I don't have a clue. I can guess on the bumper on the frame
- I see a fastener on the frame but other than that I'm lost. Anyone have
pics or can help me out?
I found this in the MY archives from 2006 and still shaking my head.
> I am looking at installing the new rubber bumpers on the rear axle. Since
> they don't streach far enough to clear the bearing flange the only
> way I can see
> to install them is to cut them and tie them with safety wire (or zip ties).
> Before I pass the point of no return I ask: "Am I missing something?"
I don't think so. That's the way the originals went on, too.
Randall
Thanks in advance,
Jack 1959 TR3A
Philadelphia, PA
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|