Pete,
A refrigeration valve wrench works nicely.
http://www.mytoolstore.com/klein/68309.html
You need the one with the 5/16" square Part # 68310
Worked my way through college servicing HVAC and Refrigeration equipment and
some of the tools are still handy.
Terry Geiger
www.GeigerGarage.com
----- Original Message -----
From: "bielings" <bielings@comcast.net>
To: <Triumphs@autox.team.net>
Sent: Monday, March 29, 2010 5:41 PM
Subject: [TR] Transmission tool
>I am rebuilding the shifter lever controls in TR3 transmission.
> In order to remove the shifter forks I need to take out a retaining bolt.
> It's head is square about 8mm. Anyone know where to get
> a drive or socket that will fit it properly.
> Pete Bieling
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|