triumphs
[Top] [All Lists]

Re: [TR] recovering seats

To: triumphs@autox.team.net
Subject: Re: [TR] recovering seats
From: Bob <yellowtr@adelphia.net>
Date: Sat, 30 Jan 2010 08:46:15 -0500
On Thursday 28 January 2010 10:05:07 am John A. Wise wrote:
> I am finally getting around to recovering my TR3A seats.  I have only had
>  my Moss seat kits for 2 years. :-|  I have the one seat stripped down, I
>  cleaned up the springs and then sprayed them with Rust-Oleum Rust Reformer
>  (a spray version of naval jelly).  So my question is what type of spray
>  paint would the list suggest?  Is there any special need given the
>  constant flexing if the springs???  And since I need to run over to the
>  Depot to buy the paint, is there an appropriate color?
> 
> Thanks
> 
> John
John,

On my previous 63 TR4 restoration, which has the TR3A seat, I took the springs 
and pans outside and sand blasted them with "black beauty" fine media.

It was the only way I could get them rust free.

Then I painted them with Rust-Oleum red primer, gray primer and finally gloss 
black.

I also added some extra firm foam + jute webbing to the springs to add extra 
support.

Bob

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Suggested annual donation  $11.47



Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>