>So my question is what type of spray paint would the
>list suggest? B Is there any special need given the constant flexing if the
>the paint?
Hi, John.B When I took my seats apart to restore them, the springs were
rusted and the back quarter were unrepairable.B I laced old bed springs in
with a hog-nose and clips.
To take care of the rust, I sprayed with phosphoric acid until the rust was
neutralized and turned a hard gray color, then rinsed thoroughly.
As for paint, I went with POR-15.B These are original seat springs that will
now live longer than I will.B Did the same for the pan and seatback metal
also.
Terry Smith, '59 TR3AB TS 58667
New Hampshire where it's 3 degrees F. outside right now, but I have had doors
on my garage since yesterday!!!!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|