I have been using the cheap cork gasket that came with my head gasket
set. I glued it to the surface of the valve cover using weather strip
adhesive. It's been on and off the engine numerous times for valve
adjustments etc. with no leaks. I am careful not to over tighten it when
I put it back on.
Mike
1956 TR3 TS11544L
wbeech@flash.net wrote:
> Good morning List,
>
> I am wondering if there is anything better than the cork gasket for the
> stock chrome valve cover for my TR3A. What are you using, stock from TRF,
> Moss, BPNW or some new space age material?
>
> Thanks,
>
> Bill Beecher
> '58 TR-3A TS/30766 L (On the road in 2009!)
> "A Triumph is man's best friend, it always comes when it is called...of
> course, some times it is difficult to make it go"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|