Justin Wagner at www.jmwagnersales.com has a great silicone gasket with sealing
washers and nuts -- be careful to not overtighten and dent the valve cover.
Tom
----- Original Message -----
From: wbeech@flash.net
To: triumphs@autox.team.net
Sent: Saturday, November 21, 2009 11:23:45 AM GMT -05:00 US/Canada Eastern
Subject: [TR] Valve cover gasket TR3
Good morning List,
I am wondering if there is anything better than the cork gasket for the
stock chrome valve cover for my TR3A. What are you using, stock from TRF,
Moss, BPNW or some new space age material?
Thanks,
Bill Beecher
'58 TR-3A TS/30766 L (On the road in 2009!)
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
_
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|