They are different, the Drivers side hinge angles (a very small
amount) to the right, the passenger to the left.
On the same subject, I am replacing the passenger side bonnet hinge,
question ... must I remove the cubby box ... yes ... no ... maybe ...
Thanks...
>Taking apart my tr-3 resulted in my throwing the 4 hinges together
>in a box. Now i'm having trouble telling them apart. I noticed in
>the Moss catalogue that the boot and bonett hinges have differant
>part numbers so i assume they're differant fitting. I find they
>look the same as far as bold holes spacing. I did find that inside
>one hinge had the numbers 4344 LH and 4348 RH. Another hinge had
>numbers 4346 RH and 4350 LH with the remaining two hinges having no
>numbers anywhere. I can't figure out why a hinge would have two
>numbers and another hinge have nothing at all.
>
>I'm not sure how to tell the hinges apart, maybe just trial and
>error. If anyone has experience or information it would help.
>
>thanks
>
>gary n.
--
"Thinking is the hardest work there is. That's why so few people
undertake it." - Henry Ford
Bill Pugh
1957 TR3
"Casper"
TS16765L
Wallace, CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|