Gary, you might find this article helpful:
http://www.buckeyetriumphs.org/technical/Brakes/MCPDWA/MC.htm
I find it helpful to wet the seal with clean brake fluid first.
I also ground all the sharp corners off of a small (cheap) screwdriver that
I use for tasks like this.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|