Joe Curto Inc in New York did a fine job on a pair of Zs and a pair of
SUs. Sent himn carb bodies only just for rebushing throttle shafts and
he dipped the Z floats for as they were fracturing from the new gas.
He replated linkage to look like new. Shipping was not bad, price and
service great - he makes the shafts for MOSS and rebuilds all kinds of
British carbs and Lucas generators, starters, plus makes many parts.
He advertises in many car magazines and been around 30-40 years.. You
can GOOGLE for a website/address/phone..
Good luck,
Carl
'63 TR4 since '74
Thinking that sending them to a rebuild shop might be an option, I
looked at
a Paltech (http://www.paltech1.com/) who are now selling carb rebuilds
on
eBay. Has anyone had any experience with this vendor? Are there other
ZS
carb rebuild vendors out that I should look at instead?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|